Honda Keyprog v3.1

2,300 €

Availability:: In Stock
Product Code:: Honda Keyprog v3.1
Brand:: Acura / Honda

* Check out below special discounts for bulk orders and dealers!

Description
Special prices
Photos (3)

Honda Keyprog v3.1 ( NEW VERSION !!! ) supports Honda cars and Acura with mechanical key since 2002 and "Keyless Start" system since 2012.

The device has an operating mode switch “K-N”, bi-color led and a sound emitter. Time recording of new key 60 to 120 second.

Supported vehicles:

Honda/Acura: from 2002 till 2023 MY.

Operating modes

Modes switch.

“N” - work with the mechanical key.
“K” - work with "Keyless start" system.

Operation sequence:

Step‐by‐step instruction for mechanical key:

Supported systems : All modern IMMO systems from 2002 onwards.

Acura: RDX, ILX, TLX, RLX, CDX;

Honda: CRV (2002+), Civic (2005+), Accord (2002+), Pilot (2002+)

1.   Set the switch to the “N” position;
2.   Switch on the ignition, turn the key to position "ON".
3.   Insert the programmer, the red led will light up, short beeps will sound;

Only one key must be inside the car!!!

4.   The red led went out + the beeps stopped ->   Switch ignition to "ACC" position;
5.   The red led lights up + the beeps sounds ->   Turn the ignition to "ON" position;
6.   The red led went out + the beeps stopped ->   Switch ignition to "ACC" position;
7.   The red led lights up + the beeps sounds ->   Turn the ignition to "ON" position;
8.   The red led went out + the beeps stopped ->   Switch ignition to "ACC" position;
9.   The red led lights up + the beeps sounds ->   Turn the ignition to "ON" position";
10. Rising “Sweep” sound from low to high tone + The green led lights -> The key is recorded!
11. Switch off the ignition. You can start the engine and use the car.

If you hear a downward “Sweep” from high to low tone, it means that the key is not recorded. You need to check the key correctness and the vehicle health.

Step‐by‐step instruction for “KeyLess Start” system:

Supported systems: Honda/Acura IMMO systems from 2012 onwards.

Honda: Civic (2014+), CRV (2015+)

1.   Set the switch to the “K” position;
2.   Switch on the ignition, turn the key to position "ON".
3.   Insert the programmer, the red led will light up, short beeps will sound;
4.   Press and hold the button until the steering lock is unblocked. The start button will flash green, the ignition will be activated;

Only one KeyLess key must be inside the car!!!

5.   The red led went out + the beeps stopped   ->   Switch off the ignition ( Press “Start/Stop” button once );
6.   The red led lights up + the beeps sounds   ->   Switch on the ignition ( Press “Start/Stop” button twice );
7.   The red led went out + the beeps stopped   ->   Switch off the ignition ( Press “Start/Stop” button once );
8.   The red led lights up + the beeps sounds   ->   Switch on the ignition ( Press “Start/Stop” button twice );
9.   The red led went out + the beeps stopped   ->   Switch off the ignition ( Press “Start/Stop” button once );
10. The red led lights up + the beeps sounds   ->   Switch on the ignition ( Press “Start/Stop” button twice );
11. Rising “Sweep” sound from low to high tone + The green led lights   ->   The key recorded!
12. Switch off the ignition. You can start the engine and use the car.

If you hear a downward “Sweep” from high to low tone, it means that the key is not recorded. You need to check the key correctness and the vehicle health.

We recommend using only the original key blanks!